The FI302 converts a FIELDBUS signal into a 4 to 20 mA signal. If the frequency converter does not have FIELDBUS capability, the bus signal can be converted into a conventional 4 to 20 mA by the FI302. The FIELDBUS signal can, for example, be a request from the bus to a frequency converter to set a conveyor speed to 3.4 ft/s.
This instrument has three independent channels, which means that three 4 to 20 mA outputs are available.
Communication
|
FOUNDATION Fieldbus on 31.25 kbit/s voltage mode according to IEC 61158-2
|
Output
|
Three 4 to 20 mA current links, external supply and common ground
|
Output Load Limitation
|
External Output Supply Voltage / 3-45 Vdc
|
Accuracy
|
±0.1%
|
Power Supply
|
Bus powered: 9-32 Vdc
|
Power Consumption
|
Quiescent 12 mA
|
Function Blocks
|
Up to 20 Dynamically Instantiable Function Blocks.
Click here for the list of available Function Blocks The Function Blocks available allow simple and complex control strategies to be placed inside the field device, making the field device an integral part of the control system. In order to fully benefit from the Function Blocks in the device a True Foundation Fieldbus system is recommended. For more information about SYSTEM302, click here. |
Configuration
|
Using local adjustment magnetic tool if device is fitted with LCD display. Complete configuration possible using PC software interface.
|
Indication
|
Optional LCD indicator
|
Material
|
Injected low copper aluminum with polyester painting or 316 stainless steel housing
|
Process Temperature Limits
|
-40 to 85 ºC (-40 to 185 ºF)
|
Ambient Humidity Limits
|
0 to 100% RH
|
Hazardous Area Certification
|
Explosion proof, weather proof and intrinsically safe
|
Mounting
|
Wall, panel, or 2" pipe with optional bracket
|
Weight
|
Nominal: 0.80 kg;
Digital display adds: 0.13 kg; Mounting bracket adds: 0.60 kg |